Learn more about our scanners at: https://joescan.com
Electrical and cable specs for JS-25 scanners.
JoeScan Cables Guide
Click here to download the self contained JoeScan scanner cable specifications guide.
JS-25 scanners have two connectors: an LTW Industrial Sealed Ethernet and an iCONN 8-conductor circular sealed connector. The 8-conductor connector is used to supply power as well as encoder and synchronization signals to the scanner.
The encoder inputs are RS-422 5-V differential signals. They support encoder rates up to a maximum of 100,000 pulses per second.
The Start Scan input signal can be driven by either RS-422 5V differential, 5V push pull, or open collector outputs. For 5V push-pull and open collector operation, the input should be to the StartScan+ signals, and the StartScan- should be left floating. The Start Scan signal is edge triggered, and by default triggers on a falling edge. The
StartScanTriggerOnHigh parameter reverses this, and causes the scanners to trigger on a rising edge.
JS-25 scanners are generally connected with our standard 8-wire cable. Alpha 2643C or an equivalent cable is suggested.
Table 1. Alpha 2643C / EN-3 / 8-Wire Diagram
|Wire Color||EN-3 Pin||Function|